by tsvetomir | Mar 15, 2022
BME280 Air pressure measurement! Introduction Watch Gunnar’s video with cool experiments! In this project we will work with the BME280 sensor, that gives us a high quality data on the temperature, humidity and air pressure level. Did you know that at humidity...
by Daniel Lux | Dec 9, 2021
pH Measurement Introduction How it works Want to measure how acidic/basic your water is with the Wappsto:bit? This tutorial will guide you How to measure water quality and other parameters? In this tutorial, we use analog pH meter sensor, that has built-in simple,...
by Daniel Lux | Nov 15, 2021
Indoor climate kit! Introduction How it works In this project we will use a SCD30 sensor together with a programmable LED strip. The SCD30 sensor is a very advanced sensor, that can measure Co2 level, temperature and humidity at the same time. The goal is to collect...
by Daniel Lux | Nov 2, 2021
All-in-on:bit Introduction How it works This is the final Wappsto:bit project for first-time users. In this project, we mix all the other projects into this one. So by the end of this project, you will be able to see the temperature, send smileys and see which button...
by Daniel Lux | Oct 29, 2021
Smiley Temp:bit Introduction How it works This is a Wappsto:bit project for first-time users. By the end of this project, you will be able to see if the temperature is over 20 degrees by a smiley on the micro:bit. First, you will program your micro:bit in MakeCode and...
Recent Comments