by Daniel Lux | Nov 2, 2021
All-in-on:bit Introduction How it works This is the final Wappsto:bit project for first-time users. In this project, we mix all the other projects into this one. So by the end of this project, you will be able to see the temperature, send smileys and see which button...
by Daniel Lux | Oct 29, 2021
Smiley Temp:bit Introduction How it works This is a Wappsto:bit project for first-time users. By the end of this project, you will be able to see if the temperature is over 20 degrees by a smiley on the micro:bit. First, you will program your micro:bit in MakeCode and...
by Daniel Lux | Oct 28, 2021
Hello-world:bit Introduction How it works This is a Wappsto:bit project for first-time users. By the end of this project, you will be able to write to your micro:bit through the wappsto.com First, you will program your micro:bit in MakeCode and then you will put the...
by Daniel Lux | Oct 28, 2021
A-B:bit Introduction How it works This is a Wappsto:bit project for first-time users. By the end of this project, you will be able to see which button was pressed last. First, you will program your micro:bit in MakeCode and then you will put the Wappsto:bit and...
by tsvetomir | Oct 27, 2021
Temp:bit Introduction How it works This is a Wappsto:bit project for the first time users. By the end of this projects you will be able to measure the temperature in the room. First, you will program your micro:bit in MakeCode and then you will put the Wappsto:bit and...
Recent Comments