Connecting the BME280 sensor

Connect the BME280 sensor to the Wappsto:bit:

  • Keep the jumper according to the setup 
  • The SDA cable (White cable) to I/O in row P20
  •  The SCL cable (Yellow cable) to I/O in row P19
  • The VCC  (Red cable) to 3.3V in the P20 row
  •  The GND (Black cable) to GND in the P20 row 

(BME280 sensor looks different to the one in the video, but is connected to the Wappsto:bit the same way)